Bullock Professional
Bullock Professional is the fastest, high quality prolab in America.
 Home Services Upload Orders Support Get Started Today About BullockPro Contact Us NewsBP Rocs 

Minolta Maxxum7D   Up

  (Printout for easy reference while shooting and for future reference.) Konica Minolta Maxxum 7D    
  Before shooting an important job, we recommend shooting a test image for our Digital Camera 30x40 Test print.  This test print made on our photographic paper printers will illustrate to you what size, quality, and color you can expect from Bullock Professional's real Endura photographic printers.

The Konica Minolta MAXXUM 7D (called the Dynax 7D in other market areas) digital Single Lens Reflex (SLR) camera is a 6.1-million-pixel, interchangeable lens digital camera, it's compatible with virtually any MAXXUM AF lens. The MAXXUM 7D is the world's first digital SLR featuring a body-integral CCD-shift, Anti-Shake (camera-shake compensation) technology that combines enhanced picture quality, performance and improved handling characteristics.

Specifically designed to match the performance requirements of the camera's imager, the MAXXUM 7D's built-in Anti-Shake technology instantly and precisely shifts the CCD to compensate for camera motion. Photographers can shoot at shutter speeds up to three steps slower than what they could use without it. And because the mechanism is integrated directly into the camera body, it works with virtually any MAXXUM AF lens – a major advantage for photographers when compared to bulky and expensive lens-based optical stabilization systems.
 

  1. Use ISO 100 (We  recommend using the lowest ISO possible.  Higher ISO settings will increase digital "noise" in the final enlarged images much like higher speed film creates grain.

  2. Set the camera resolution to:  JPEG (ExtraFine) Resolution: 3008x2000

  3. Using studio lights: Set white balance to "Flash".

  4. If you are NOT using studio lights, set White Balance to: "Auto".

  5. Image Sharpening: 0

  6. Saturation: 0

  7. Contrast: 0

  8. Color Mode: Natural: sRGB

  9. Record these settings so you will always know how your camera was set for the test print.

  10. Setup for a vertical head and shoulders shot in the studio under studio lighting.

  11. Be sure camera is critically focused and the exposure is perfect.

  12. Take ONE shot of the subject at these settings and copy it directly to a CD. (Do Not open or manipulate the file in any way before sending.)

  13. Place the CD in a Bullock Professional work order envelope.  Note on work order that this is for a "30x40 Digital Camera Test".

  14. We will print a 30x40 print that shows the center strip of your image in 30x40, 24x30, 20x24, 16x20, 11x14, 8x10, and 5x7 print size.

  15. Once you have your print back, you can determine what size, color, and quality these settings will yield when sending images to Bullock Digital for genuine photographic prints.

  16. In the unlikely event that your 30x40 is unsatisfactory for some reason, please call Don Bullock to discuss changing your camera settings and running another test print.

  17. Important -  Once these settings are established it is very important that you do not make changes unless you run another Digital Camera Test Print and verify the new settings will yield a satisfactory result!

 

 
         
         
               
 





 

 


1.888.Bullock  (1.888.285.5625)
  
CustomerService@BullockPro.com


Bullock Professional
 308 Concord Road, Albemarle NC  28001

Powered by
Bullock  Web Hosting & Design 
©2004-07

 
     

 

ypi